Carbide Combined Drills & Countersinks

Combined Drills & Countersinks

Colton Cutting Tools 61821 | 60 Degree Number 0 Carbide Combined Drill & Countersink 1/32" Pilot x 1/8" Shank x 1-1/2" OAL

Combined Drills & Countersink

Colton Cutting Tools 61821 | 60 Degree Number 0 Carbide Combined Drill & Countersink 1/32″ Pilot x 1/8″ Shank x 1-1/2″ OAL

Colton Cutting Tools 61822 | 60 Degree Number 1 Carbide Combined Drill & Countersink 3/64" Pilot x 1/8" Shank x 1-1/2" OAL

Combined Drills & Countersink

Colton Cutting Tools 61822 | 60 Degree Number 1 Carbide Combined Drill & Countersink 3/64″ Pilot x 1/8″ Shank x 1-1/2″ OAL

Colton Cutting Tools 61823 | 60 Degree Number 2 Carbide Combined Drill & Countersink 5/64" Pilot x 3/16" Shank x 2" OAL

Combined Drills & Countersink

Colton Cutting Tools 61823 | 60 Degree Number 2 Carbide Combined Drill & Countersink 5/64″ Pilot x 3/16″ Shank x 2″ OAL

Colton Cutting Tools 61824 | 60 Degree Number 3 Carbide Combined Drill & Countersink 7/64" Pilot x 1/4" Shank x 2" OAL

Combined Drills & Countersink

Colton Cutting Tools 61824 | 60 Degree Number 3 Carbide Combined Drill & Countersink 7/64″ Pilot x 1/4″ Shank x 2″ OAL

Colton Cutting Tools 61825 | 60 Degree Number 4 Carbide Combined Drill & Countersink 1/8" Pilot x 5/16" Shank x 2-1/8" OAL

Combined Drills & Countersink

Colton Cutting Tools 61825 | 60 Degree Number 4 Carbide Combined Drill & Countersink 1/8″ Pilot x 5/16″ Shank x 2-1/8″ OAL

Colton Cutting Tools 61826 | 60 Degree Number 5 Carbide Combined Drill & Countersink 3/16" Pilot x 7/16" Shank x 2-3/4" OAL

Combined Drills & Countersink

Colton Cutting Tools 61826 | 60 Degree Number 5 Carbide Combined Drill & Countersink 3/16″ Pilot x 7/16″ Shank x 2-3/4″ OAL

Each Colton carbide combined drill and countersink pairs a 60 degree cutting point with a pilot and shank sized for its number, so you can match the tool to the job at a glance. Browse the range from Number 0 up to Number 5, then open any listing for full pilot, shank and overall length details. For guidance on running these tools, see our speed and feed charts.